Some users can be very annoying, as any IRC operator can attest. Some
can in fact be downright abusive. Sometimes the best way of dealing
with these users is to ban them from the entire network. The G-line
system permits this.
G-lines are fairly complicated. A G-line can be active or inactive,
either locally or globally. It can be a purely local G-line, or
global. It could be based on IP address or on host name. In short,
there are many variations on the basic G-line. Worse, there is also
the concept of a "bad channel," or BADCHAN, that has been tacked onto
the G-line subsystem, when it should have been a separate command in
the first place.
Different types of G-lines are differentiated from each other through
the use of various flags. Some of these flags are maintained solely
by the G-line subsystem, where as others are passed to various
functions in the API.
<macro>
#define GLINE_MAX_EXPIRE 604800 /* max expire: 7 days */
This macro lists the maximum expire time a G-line is permitted to
have. This value is limited to 7 days to prevent abuse of the system.
</macro>
<macro>
#define GLINE_ACTIVE 0x0001
This flag is used to indicate that a given G-line is globally active.
</macro>
<macro>
#define GLINE_IPMASK 0x0002
This flag is used to indicate that a given G-line is an IP mask. This
flag is maintained internally by the G-line subsystem.
</macro>
<macro>
#define GLINE_BADCHAN 0x0004
This flag is used to indicate that a given G-line specifies a BADCHAN,
a channel that users are not permitted to join. This flag is
maintained internally, but is also used in gline_find() to search for
a BADCHAN for a particular channel.
</macro>
<macro>
#define GLINE_LOCAL 0x0008
This flag is used to indicate that a given G-line is a local G-line.
Local G-lines do not affect users on other servers.
</macro>
<macro>
#define GLINE_ANY 0x0010
This flag is passed to gline_find() to signal that function to return
any G-line or BADCHAN that matches the passed mask string. It is
never set on a real G-line.
</macro>
<macro>
#define GLINE_FORCE 0x0020
This flag is passed to gline_add() to force the server to accept an
expire time that might be out of bounds. It is never set on a real
G-line.
</macro>
<macro>
#define GLINE_EXACT 0x0040
This flag is passed to gline_find() to signal that function to return
only G-lines that exactly match the passed mask string. That is, the
ircd_strcmp() function is called to compare the G-line to the mask,
rather than the match() function. This flag is never set on a real
G-line.
</macro>
<macro>
#define GLINE_LDEACT 0x0080 /* locally deactivated */
This flag is set on global G-lines that have been locally
deactivated. This flag is maintained internally by the G-line
subsystem.
</macro>
<macro>
#define GLINE_GLOBAL 0x0100 /* find only global glines */
This flag is passed to gline_find() or gline_lookup() to specify that
the caller is only interested in global G-lines. This flag is never
set on a real G-line.
</macro>
<macro>
#define GLINE_LASTMOD 0x0200 /* find only glines with non-zero lastmod */
This flag is passed to gline_find() or gline_lookup() to specify that
the caller is only interested in G-lines with a non-zero lastmod time,
that is, G-lines that were not set by a U-lined service. This flag is
never set on a real G-line.
</macro>
<struct>
struct Gline;
The struct Gline describes everything about a given G-line. None of
its fields may be directly accessed by the application; use the
functions and macros described below instead.
</struct>
<function>
int GlineIsActive(struct Gline* g);
This macro returns a non-zero value if the G-line is active, or 0
otherwise. If a G-line is locally deactivated, this macro will always
return 0.
</function>
<function>
int GlineIsRemActive(struct Gline* g);
This macro returns a non-zero value if the G-line is active, ignoring
whether or not it is locally deactivated.
</function>
<function>
int GlineIsIpMask(struct Gline* g);
This macro returns a non-zero value if the G-line is an IP mask.
</function>
<function>
int GlineIsBadChan(struct Gline* g);
This macro returns a non-zero value if a G-line actually represents a
BADCHAN.
</function>
<function>
int GlineIsLocal(struct Gline* g);
This macro returns a non-zero value if a G-line is local only.
</function>
<function>
char* GlineUser(struct Gline* g);
This macro returns the user name associated with the G-line. If the
G-line represents a BADCHAN, this will contain the channel name.
</function>
<function>
char* GlineHost(struct Gline* g);
This macro returns the host name associated with the G-line. If the
G-line represents a BADCHAN, this will be a NULL pointer.
</function>
<function>
char* GlineReason(struct Gline* g);
This macro returns the reason that was given when the G-line was set.
</function>
<function>
time_t GlineLastMod(struct Gline* g);
G-lines that were not set by a U-lined service have a modification
time that must be monotonically increasing. This macro simply returns
that modification time.
</function>
<function>
int gline_propagate(struct Client *cptr, struct Client *sptr,
struct Gline *gline);
When a global G-line is set or modified, all other servers must be
notified of the new G-line. This function takes care of propagating
the G-line specified by _gline_, originated by the client _sptr_, to
all servers except _cptr_ (which may be a NULL pointer).
</function>
<function>
int gline_add(struct Client *cptr, struct Client *sptr, char *userhost,
char *reason, time_t expire, time_t lastmod, unsigned int flags);
This function simply adds a G-line, set by _sptr_ and with a
_userhost_, _reason_, _expire_, and _lastmod_ as specified. The
_flags_ parameter is a bit mask consisting of the binary OR of
GLINE_FORCE, GLINE_LOCAL, or GLINE_ACTIVE, as appropriate. The
gline_add() function also calls gline_propagate() to propagate the
G-line, and kills off any local users matching the G-line if it is
active.
</function>
<function>
int gline_activate(struct Client *cptr, struct Client *sptr,
struct Gline *gline, time_t lastmod, unsigned int flags);
This function activates the G-line specified by _gline_, setting its
_lastmod_ time as specified. If _flags_ is GLINE_LOCAL and if the
G-line is locally deactivated, this function will turn off the local
deactivation flag, but will not modify _lastmod_. If the G-line is
globally deactivated, passing this function the GLINE_LOCAL flag will
have no effect.
</function>
<function>
int gline_deactivate(struct Client *cptr, struct Client *sptr,
struct Gline *gline, time_t lastmod, unsigned int flags);
This function is similar to gline_activate() except that it
deactivates the G-line. If the given G-line is local, or if it was
set by a U-lined service (and GLINE_LOCAL was not passed via _flags_),
then the G-line is deleted from memory. In all other cases, the
G-line is simply deactivated, either locally (if GLINE_LOCAL was
passed via _flags_) or globally. Global deactivation will update the
_lastmod_ time.
</function>
<function>
struct Gline *gline_find(char *userhost, unsigned int flags);
This function looks up a G-line matching the given _userhost_ value,
under control of the _flags_ parameter. Valid _flags_ that may be
passed are: GLINE_BADCHAN, GLINE_ANY, GLINE_GLOBAL, GLINE_LASTMOD, or
GLINE_EXACT, each described above.
</function>
<function>
struct Gline *gline_lookup(struct Client *cptr, unsigned int flags);
This function looks up a G-line matching the given client, specified
by _cptr_, under the control of the _flags_. Valid values for _flags_
are GLINE_GLOBAL and GLINE_LASTMOD, as described above.
</function>
<function>
void gline_free(struct Gline *gline);
This function releases all storage associated with a given G-line.
</function>
<function>
void gline_burst(struct Client *cptr);
This function generates a burst of all existing global G-lines and
BADCHANs and sends them to the server specified by _cptr_.
</function>
<function>
int gline_resend(struct Client *cptr, struct Gline *gline);
This function resends the _gline_ to a server specified by _cptr_.
This may be used if, for instance, it is discovered that a server is
not synchronized with respect to a particular G-line.
</function>
<function>
int gline_list(struct Client *sptr, char *userhost);
This function sends the information about a G-line matching _userhost_
to the client specified by _sptr_. If _userhost_ is a NULL pointer, a
list of all G-lines is sent.
</function>
<function>
void gline_stats(struct Client *sptr);
This function generates a list of all G-lines, sending them to the
user _sptr_ by a /STATS G response.
</function>
<authors>
Kev <klmitch@mit.edu>
</authors>
<changelog>
[2001-6-15 Kev] Initial documentation for the G-line API.
</changelog>
