Basic IRCd Commands
Just as you are able to surf the web with a few shortcuts and tricks to make things easier, IRC is very similar. This guide will describe most of the basic IRC commands that are commonly used. It may be worthwhile to note all IRC commands can be typed into the commandline of your IRC client (i.e., the text input area -- the area you type to chat), and are prefixed with a forward-slash "/".
Arguments enclosed in angle brackets (e.g., <text>) denote that it's required, while those enclosed in square brackets (e.g., [text]) are optional.
A full listing of commands supported by DareNET's servers can be found here.
In This Guide: |
/JOIN
Syntax: /JOIN <#channel> [key]
Joins you to the channel you specify.
If the channel requires a "key" (password) to join, you can supply that after the channel name as well.
Examples:
- /JOIN #darenet
- Joins you to the channel #darenet.
- /JOIN #darenet aPpLeS
- Joins you to the channel #darenet using the key "aPpLeS".
/PART
Syntax: /PART <#channel> [reason]
The PART command will cause you to leave the channel you specify.
If a reason was given, it will be shown in the part message sent to other users in the channel.
Examples:
- /PART #darenet
- Parts you from the channel #darenet.
- /PART #darenet bbl
- Parts you from the channel #darenet with a reason "bbl".
/LIST
Syntax: /LIST [parameters]
The LIST command is used to obtain a list of all public channels on the network (the same list shown on the channel listing page.
The /LIST command also supports several modifiers, which can be used to provide a listing of channels whose name or topic match a specific pattern (or conversely, don't match the pattern), have been active within a specific time frame, etc. For more information on such advance usage, go here.
Examples:
- /LIST
- Lists all public channels.
- /LIST *help*
- Lists all public channels whose name matches the pattern *help*.
- /LIST C>60
- Lists all public channels that have existed longer than one hour (60 minutes).
/NICK
Syntax: /NICK <nickname>
The NICK command allows you to easily change your nickname.
Example:
- /NICK JoeCool
- Changes your nickname to 'JoeCool'.
/QUIT
Syntax: /QUIT [reason]
The QUIT command disconnects you from the network. If a reason is provided, it will be shown to other users who are in a common channel with you.
Examples:
- /QUIT
- Disconnects you from the network.
- /QUIT I shall bbl.
- Disconnects you from the network with the reason "I shall bbl."
/AWAY
Syntax: /AWAY [reason]
The AWAY command, when given with a reason, is used to mark you as being away. If no reason is given, it will mark as no longer being away.
While away, the reason given is shown in WHOIS messages and is sent to users who private message you.
Examples:
- /AWAY going for out lunch!
- Marks you as being away, with the reason "going out for lunch!"
- /AWAY
- Marks you as no longer being away.
WHO
Nothing here yet!
IRCOPS
You can use the command /ircops
to list the available IRC Operators on the network.
When you use this command you will see something like:
DareNET IRC Operators: [A] istok (AWAY) [*.darenet.org] - Idle: 0 [A] Excalibur [*.darenet.org] - Idle: 0 [A] SecretAgent (AWAY) [*.darenet.org] - Idle: 498841 Total: 3 IRCops connected
LUSERS
This command shows how much users are connected to DareNET at any given time as well as the max count that was reached since last (re)start. It also shows some additional verbose information such as how much users are authenticated to our services, how much servers exist in the network, how much IRC Operators are online, and how much channels are formed.
== There are 42 users and 29 authed on 14 servers == 6 operator(s) online == 59 channels formed == I have 1 clients and 1 servers == Current local users: 1 Max: 20 == Current global users: 71 Max: 107 -webchat.darenet.org- Highest connection count: 12 (11 clients) (6613 connections received)
Chat
These are some general commands that allow you to do some cool things such as actions, send messages, notices and other miscellaneous things.
Emote/Action
Normally when you chat people see something like:
<YourNick> i am cool
You can issue emotes into a channel or private message by typing the following command: /me is cool
The target channel or user will see something like the following
* YourNick is cool
MSG
You can send someone a quick message without opening a separate window on your side by typing /msg <nick> <your text here>
Say for example that I wanted to message SecretAgent to ask how he was doing /msg SecretAgent Hi SecretAgent how are you doing today?!?!?!
QUERY
If instead I wanted to open a dedicated window I would type /query <nick> [optional text here]
So if I typed /query SecretAgent Hi! How are you?
that would open a seperate window and send the message "Hi! How are you?" to SecretAgent.
NOTICE
A notice is used to send someone a quick message without opening a separate windows by typing /notice <nick> <your text here>
Say for example that I wanted to notice ShivX to ask if he disappeared off the face of the earth, I would type: /notice ShivX Are you still alive????!?
WHOIS
Whois is the most useful command that you will ever utilize on IRC, with Whois you will find out if someone is authenticated to their account and if so, what their account name is! You can also find additional information such as:
- Idle Time.
- What public channel(s) they are in.
- Their host(mask).
- Whether they are staff or not.
- If they are away or not (via /away).
Say you wanted to get information on someone to see if they were an IRC Operator or what public channels they were in you can type /whois <nick>
So if i wanted to see SecretAgent's info I could type /whois SecretAgent
and I would see something like the following:
SecretAgent [sa@staff.darenet] realname : woah. channels : @#support #darenet @#dev @#thelab server : *.darenet.org [Daring to be different!] away : bbl : IRC Operator account : SecretAgent End of WHOIS
Channel Management
The following commands are for channel management.
TOPIC
You can see and set the topic of your channel (as seen in /list and upon /join) by typing /topic <#channel> [new topic here]
if you do not include the text after channel you will simply see what the topic is. If you do include some text after #channel that will set the topic.
KICK
You can kick a user out of your channel by typing /kick <#channel> <nickname>
this would kick nickname from #channel assuming you were a halfop or up.
INVITE
You can invite a user to your channel by typing /invite <nickname> <#channel>
this would invite nickname to #channel assuming you were a halfop or up.