Server Commands/GLINE

Revision as of 09:12, 4 October 2008

Command Token: GL

GLINE [[!][+|-][$<type>]<mask> [[<target>] <expiration> :<reason>]]

G-lines themselves are fairly complicated.

A G-line can be active or inactive, either locally or globally. It can be a purely local G-line, or global. It can be based on an IP address, hostname or even gcos. In short, there are many variations on the basic G-line. Worse, there is also the concept of a "bad channel", or BADCHAN, that has been tacked onto the G-line subsyetem, when, in all honesty, should have been a separate command in the first place.

! prefix

The "!" prefix has been disabled on DareNET. It used to forcefully place G-lines that otherwise would be denied by the server for being "too wide." If you need to set wide G-lines, use OperServ instead, or contact the Abuse Team <abuse@darenet.org>.

If <mask> is not given, or it is not prefixed by "+" or "-", a list of G-lines will be returned. If the "+" or "-" prefixes are used, then the <expiration> and <reason> parameters must also be given, even if the G-line already exists.

If <target> is specified, then it MUST match the local server (e.g. the server you are on); otherwise it is implied. By default, the ability to set remote or global G-lines has been disabled for all IRC operators. Instead, OperServ should be used instead. However, such permissions can be granted through OperServ by a network administrator, but this rarely done.

If the G-line currently exists, a prefix of "+" will cause an inactive G-line to be activated, whereas a prefix of "-" will cause an active G-line to be deactivated. If an attempt is made to modify a G-line set by a U-lined services, such as OperServ, the change will be forced to be local.

The <type> argument can be used to G-line user realnames (gcos) by using $R. The expiration can be specified either in seconds or as a formatted time (e.g. 2d5m3s).

(Return to Main listing of Server Commands)

@@ Line 1: / Line 1: @@
-<code>GLINE [[!][+|-][$<type>]<mask> [[<target>] <expiration> :<reason>]]</code>
+{| class="wikitable" width="25%" style="font-size: 85%; text-align: left;"
+|-
+| '''Command Token:''' GL
+|}
+<pre>GLINE [[!][+|-][$<type>]<mask> [[<target>] <expiration> :<reason>]]</pre>
+G-lines themselves are fairly complicated.
-G-lines are fairly complicated. A G-line can be active or inactive, either locally or globally. It can be a purely local G-line, or global. It could be based on an IP address or on hostname. In short, there are many variations on the basic G-line. Worse, there is also the concept of a "bad channel", or BADCHAN, that has been tacked onto the G-line subsystem, when, in all honesty, should have been a separate command in the first place.
+A G-line can be active or inactive, either locally or globally. It can be a purely local G-line, or global. It can be based on an IP address, hostname or even gcos. In short, there are many variations on the basic G-line. Worse, there is also the concept of a "bad channel", or BADCHAN, that has been tacked onto the G-line subsyetem, when, in all honesty, should have been a separate command in the first place.
-On DareNET, IRC operators cannot use the "!" prefix, or set global G-lines via the GLINE command. Trying to do so will result in the server rejecting the command. Instead, OperServ should be used to set wide and/or global G-lines.
+'''! prefix'''
+The "!" prefix has been disabled on DareNET. It used to forcefully place G-lines that otherwise would be denied by the server for being "too wide." If you need to set wide G-lines, use OperServ instead, or contact the Abuse Team <abuse@darenet.org>.
+If <mask> is not given, or it is not prefixed by "+" or "-", a list of G-lines will be returned. If the "+" or "-" prefixes are used, then the <expiration> and <reason> parameters must also be given, even if the G-line already exists.
+If <target> is specified, then it MUST match the local server (e.g. the server you are on); otherwise it is implied. By default, the ability to set remote or global G-lines has been disabled for all IRC operators. Instead, OperServ should be used instead. However, such permissions can be granted through OperServ by a network administrator, but this rarely done.
+If the G-line currently exists, a prefix of "+" will cause an inactive G-line to be activated, whereas a prefix of "-" will cause an active G-line to be deactivated. If an attempt is made to modify a G-line set by a U-lined services, such as OperServ, the change will be forced to be local.
+The <type> argument can be used to G-line user realnames (gcos) by using $R. The expiration can be specified either in seconds or as a formatted time (e.g. 2d5m3s).
-If <mask> is not given, or if it is not prefixed by "+" or "-", a list of G-lines will be returned. If the "+" or "-" prefixes are used, the <expiration> and <reason> parameters must be given, even if the G-line already exists. On DareNET, if you do specify <target>, it must be the local server; otherwise, it will be rejected. If left blank, it is implied to be a local G-line. If the G-line currently exists, a prefix of "+" will cause an inactive G-line to be activated, whereas a prefix of "-" will cause an active G-line to be deactivated. If an attempt is made to modify a G-line set by a U-lined services, such as OperServ, the change will be forced to be local. The <type> argument can be used to G-line user realnames (gcos) by using $R. The expiration can be specified either in seconds or as a formatted time (e.g. 2d5m3s).
 [[Server Commands|(Return to Main listing of Server Commands)]]